请问一下Creep properties are unrealistic at one or more integration points in 105 elements. 是什么原因啊

The aspect ratio for 130 elements exceeds 100 to 1. The elements have been identified in element set WarnElemAspectRatio.1 elements are curved/warped.

The elements have been identified in element set WarnElemDistorted. OP=NEW on *CONTACT is ignored when the general contact definition is specified as model data.

错误如下：ELEMENT SET HAS BEEN REQUESTED TO BE IMPORTED AND DOES NOT EXIST ON THE TRANSFER FILE.在上一步的model的Output Database中是有element sets的，为什么会提示说不存在呢，有没有大佬遇到过类似问题，求解答，如果成功解决，有偿

The nodes have been identified in node set WarnNodeBCIncorrectDof.

There are a total of 7 excessively distorted elements The elements contained in element set ErrElemExcessDistortion-Step1 have distorted excessively.

The elements have been identified in element set WarnElemAdaptMeshDistortStep1Inc1.54 ELEMENTS WOULD HAVE EXCESSIVE DISTORTION AS A RESULT OF MESH SMOOTHING.

Please turn it off if set up by accident. *** Warning 10302 (KEY+302) CHECKING MATERIAL INPUT Part ID= 2 The default hourglass properties of the following ALE part are

Please turn it off if set up by accident. *** Warning 10302 (KEY+302) CHECKING MATERIAL INPUT Part ID= 2 The default hourglass properties of the following ALE part are

a restart and dynain are written and ls-dyna contiunues calculations. swd. a restart and dynain are written and ls-dyna terminates.

The elements have been identified in element set ErrElemVolSmallNegZero.已经在ErrElemVolSmallNegZero看到了0体积单元，但不知道怎么删除它们以便成功提交job

Check the element connectivities for underlying elements 4041 instance part-1-1 and 1548398 instance part-1-1 (sharing the common edge whose end points are nodes 141 instance part-1-1 and 142 instance

The elements have been identified in element set ErrElemBeamSecDirVect.

Check the element connectivities for underlying elements 51221 instance fluid1-1 and 65798 instance fluid1-1 (sharing the common edge whose end points are nodes 49233 instance fluid1-1 and 49235 instance

1 elements in the adaptive mesh domain are distorting so much that they turn inside out. The elements have been identified in element set WarnElemAdaptMeshDistortStep3Inc69.

The elements are identified in element set ErrElemPermNoInitVoidRatio.报错显示 在inp文件中输入了 /在材料属性改 还是这样报错 这应该怎么修改呀